Dual Mode Guitar Tone Control

 The DMT Tone Control is a passive dual mode tone control that can be set to operate as a standard tone control or a high frequency contour control. It also features two user selectable bass cut/low contour modes that are activated by pulling up the push/pull switch to further expand tone shaping capabilities. Now you can finetune your pickups high and low frequencies simultaneously. 

DMT Dual Mode Tone Control Features:

• Expands tone shaping of high and low frequencies simultaneously
• Selectable standard tone mode or high contour tone mode
• Two selectable bass cut modes tuned for single coils & humbuckers
• Tuned specifically for electric guitar
• Completely passive-No battery needed.
• Simple three wire installation.
• Wide range of frequency shaping modes.

Standard Tone Mode Frequency Adjustment Range:

• 6K Pickup (vintage single coil) - Tone pot adjusts frequencies above 950Hz
• 8K Pickup (hot single coil/vintage humbucker) - Tone pot adjusts frequencies above 710Hz
• 10K Pickup (hot humbucker) - Tone pot adjusts frequencies above 568Hz 

High Contour Mode Frequency Adjustment Range:

• 6K Pickup (vintage single coil) - Tone pot adjusts frequencies above 3.9kHz
• 8K Pickup (hot single coil/vintage humbucker) - Tone pot adjusts frequencies above 2.93kHz
• 10K Pickup (hot humbucker) - Tone pot adjusts frequencies above 2.34kHzHz 

Bass Cut/Tight Mode 1 Frequency Cut Range (push/pull UP):

• 250K Volume Pot - Cuts frequencies Below 636Hz
• 500K Volume Pot - Cuts frequencies Below 320Hz

Bass Cut/Tight Mode 2 Frequency Cut Range (push/pull UP):

• 250K Volume Pot - Cuts frequencies Below 200Hz
• 500K Volume Pot - Cuts frequencies Below 100Hz